VVDI 2 BMW read the ISN from MSD and MSV ECUs and more

VVDI 2 BMW V4.9.0 is able to read the ISN from MSD and MSV ECUs incl. MSV80, MSV801, MSD80, MSV801, MSV802, MSV812, MSV851, MEVD17xx -E Series, MEV17N46 / ME17N45 – E series, MEVD17xx – F series.

VVDI2 – BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding


  1. Open VVDI 2 BMW V4.9.0, click on “Key learn” then “ECU ISN”.


  1. Select type, i.e MSV80.


  1. Click on “Read ECU Information” and get VIN, type, hardware number, software number, ZB number and type number etc.


  1. Click on “Read ECU ISN”, then get message ” Warning: you are starting to read ECU ISN, we strongly recommend you connect extra power to car! Read ECU ISN require about 6-8 minutes.

Continue? Click on “Yes” to continue.


  1. Waiting…until VVDI2 BMW read out ISN successfully.