BMW FEM Programmer
Front Electronic Module (FEM) Comprehensive introduction
The Front Electronic Module (FEM) represents a new generation which supersedes existing control units and their functions. As a result of the modular principle, the Front Electronic Module (FEM) can be installed in all series. The Front Electronic Module (FEM) is the central control unit in the vehicle electrical system. At the same time, the Front Electronic Module (FEM) is the gateway for the other control units. The Front Electronic Module (FEM) provides functions from the previous control units footwell module (FRM), Car Access System (CAS), Junction Box Electronics (JBE) and central gateway module (ZGM).
The central gateway module (ZGM) is installed in the Front Electronic Module (FEM) as an independent control unit. The aim is to reduce the number of control units and improve component networking. At the same time, the optimisation of the wiring harness reduces the physical bus capacity.
The following functions of the Car Access System (CAS) have been integrated in the Front Electronic Module (FEM).
Electric steering lock
Central locking system
The following functions of the Junction Box Electronics (JBE) have been integrated in the Front Electronic Module (FEM).
Power window regulator
Washer jet heating
Automatic air recirculation control
The following functions of the footwell module (FRM) have been integrated in the Front Electronic Module (FEM).
The central gateway module (ZGM) is integrated in the Front Electronic Module (FEM). It is seen as a control unit within the control unit, as the central gateway module (ZGM) acts as a self-sufficient control unit within the Front Electronic Module (FEM).
The task of the central gateway module (ZGM) is to connect all bus systems. This combination allows general use of information from the individual bus systems. The central gateway module (ZGM) is able to implement various reports and speeds on other bus systems. The programming data are transferred to the vehicle by Ethernet via the central gateway module (ZGM).
Brief component description
Front electronic module (FEM): Front Electronic Module
The Front Electronic Module (FEM) is located in the A-pillar of the passenger footwell and controls all functions in the front section of the vehicle.
The Front Electronic Module (FEM) is the control unit which controls entry and access to the vehicle. The electronic immobiliser is deactivated via key identification, thus enabling engine start and other vehicle functions.
The following graphic shows the Front Electronic Module (FEM).
BMW FEM/BDC Programmers:
Newest VVDI2 support more powerful functions and vehicles than vvdi, such as BMW, Porsche. And VVDI2 commander supports online update, newly add BMW FEM/BDC Function.
Note: VVDI2 now add BMW FEM & BDC functions, VVDI2 Must have BMW OBD Function, then can open this function.
There are two ways to get this function:
1.If you only have VVDI2 on our site, then you need to pay 800USD to get this authorization.
2.If you have VVDI2 + Ikeycutter Condor on our site，then you need to pay 600USD to get this authorization.
|Authorization Name||VVDI2 Full Version||VVDI2 VAG||VVDI2 BMW||VVDI2 Basic|
|BMW OBD Authorization||√||+549USD||√||+549USD|
|Without Ikeycutter Condor||+800USD||+800USD||+800USD||+800USD|
|With Ikeycutter Condor||+600USD||+600USD||+600USD||+600USD|
Article about VVDI2 Program For BMW FEM:
Yanhua BMW FEM Key Programmer, online update, support offline operate, safe and stable, easy to operate, support latest FEM vehicles till 2017
Yanhua BMW FEM/BDC Key Programmer BMW Vehicles List:
1 Series F20/F21 2011-2017
2 Series F22/F23/F45/F46 2014-2017
3 Series/GT F34/F35 2012-2017
4 Series F30/F31/F32/F33/F36 2014-2017
X5 F15 2014-2017
X6 F16 2015-2017
Articles about YH FEM Programmer for BMW FEM:
CGDI MSV80 BMW Car Key Programmer CGDI Functions:
1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.
CGDI Prog BMW MSV80 Support Model list:
|Model||Has key to match key||Without key to match||Read ISN code||Replace engine computer DME||BMW Key unkock||Working time|
Articles about CGDI Prog Program for BMW FEM: